首页 > 经典产品 > 电动移动螺杆空气压缩机

电动移动螺杆空气压缩机

  • 品牌:

  • 规格:

  • 型号:

  • 浏览:20494    产品秀
二维码
电动移动螺杆空气压缩机 二维码


☆排气压力:0.7-2Mpa
☆排气量:4.8-35M 3/Min
☆电机功率范围:37-250kW
产品简介:
电动移动螺杆空气压缩机
移动式螺杆空气压缩机广泛应用于矿山、水利、交通、造船、城建、能源、军工等行业。在欧美等发达国家,动力用移动式空气压缩机,可以说100%是螺杆空压机。在我国移动式螺杆空压机正以惊人的速度替代其他种类的空压机。
这是因为螺杆式压缩机具备以下主要优点:
1、可靠性高:压缩机零部件少,没有易损件,因而它运转可靠,寿命长,大修间隔期可达4~8万小时。
2、操作维护方便:自动化程度高,操作人员不必经过长时间的专业培训,可实现无人值守运转。
3、动力平衡性好:没有不平衡惯性力,可平稳地高速运转,可实现无基础运转,特别适合用作移动式压缩机,体积小重量轻、占地面积少。
4、适应性强:具有强制输气的特点,容积流量几乎不受排气压力的影响,在宽广的转速范围内能保持高效率。

5、电动移动式螺杆空压机,功率范围11~250kW、排气量范围覆盖至40m 3/min。每一款基本型可根据用户需要变为不同排气量、不同排气压力的一个系列产品。


$Exhaust pressure: 0.7-2mpa

Exhaust volume: 4.8-35m 3 / min

Motor power range: 37-250kw

Product introduction:

electric moving screw air compressor

Mobile screw air compressor is widely used in mining, water conservancy, transportation, shipbuilding, urban construction, energy, military and other industries. In developed countries such as Europe and the United States, 100% of mobile air compressors are screw air compressors. In China, the mobile screw air compressor is replacing other kinds of air compressor with amazing speed.

This is because the screw compressor has the following main advantages:

1. High reliability: the compressor has few parts and no wearing parts, so it has reliable operation and long service life, with overhaul interval of 40000-80000 hours.

2. Convenient operation and maintenance: high degree of automation, operators do not need to go through long-term professional training, can achieve unattended operation.

3. Good dynamic balance: no unbalanced inertia force, stable and high-speed operation, no foundation operation, especially suitable for mobile compressors, small size, light weight, small floor area.

4. Strong adaptability: with the characteristics of forced gas transmission, the volume flow is almost not affected by the exhaust pressure, and can maintain high efficiency in a wide range of speed.

5. Electric movable screw air compressor, with power range of 11 ~ 250KW and exhaust capacity range of 40m 3 / min. Each basic model can be changed into a series of products with different exhaust volume and different exhaust pressure according to the needs of users.